For detailed information and engine specifics,
please see our performance engine page.

THE MERCENARY
$1999.95*

Bare Bones Closed Deck Block

What’s Included?

  • CNC closed deck conversion
  • Hone the cylinders to equal size and provide the cylinder bore size
  • Replace oil galley plugs
  • Deck the cylinder block with our custom deck plate

 

Send us a CLEAN and COMPLETELY STRIPPED (including bed plate) block to us.

THE HITMAN
$3349.95*

Closed deck conversion with crank installed

What’s Included?

  • CNC closed deck conversion
  • Hone the cylinders to equal size, and provide the cylinder bore size
  • Deck the cylinder block with our custom deck plate
  • Check and if needed, straighten crank
  • Refurbish the crankshaft, and polish the journals
  • Replace oil galley plugs
  • Clean all oil passages
  • Inspect crank sensor tone wheel
  • Measure and decode block and crankshaft
  • Balance crankshaft and pistons to .5 gram
  • Replace main bearings
  • Replace and torque bedplate bolts
  • Replace and torque main bolts
  • Install front and rear main seals
  • Install bedplate injection plugs, and seal bedplate
  • Check turning torque of rotating assembly

 

Send us a CLEAN block with THE CRANKSHAFT AND BEDPLATE ORIGINALLY TORQUED (DO NOT remove them) to us.

THE PUNISHER
$4999.95*

Assembled Short Block With Stock Rods & JE Pistons
Exchange engine program!  The fastest way to get back on the road!

What’s Included?

  • CNC closed deck conversion
  • Hone the cylinders to equal size, and provide the cylinder bore size
  • Deck the cylinder block with our custom deck plate
  • Check and if needed, straighten crank
  • Refurbish the crankshaft, and polish the journals
  • Clean all oil passages
  • Replace oil galley plugs
  • Inspect crank sensor tone wheel
  • Measure and decode block and crankshaft
  • Balance crankshaft and pistons to .5 gram
  • Install stock compression JE pistons
  • File fit piston rings to each cylinder
  • Replace Main bearings
  • Replace and torque bedplate bolts
  • Replace and torque main bolts
  • Install front and rear main seals
  • Install bedplate injection plugs, and seal bedplate
  • Check turning torque of rotating assembly

 

Send us a CLEAN block with THE CRANKSHAFT, RODS, PISTONS AND BEDPLATE ORIGINALLY TORQUED (DO NOT remove them) to us as a core. We’ll send you out an assembled short block, ready to go. Please specify 8 or 6 bolt crankshaft!

See core requirements >

*Price when purchased with any additional options.